点击图片查看原图
YH2M8195立式单面研磨抛光机主要用途 Main purpose：
该机用于阀板、阀片、磨擦片、刚性密封圈、气缸活塞环、油泵叶片等金属零件，以及硅、锗、石英晶体、玻璃、陶瓷、蓝宝石、砷化碳、铁氧体、铌酸锂等非金属硬脆性材料制作的薄片零件的单面研磨和抛光，如平板电脑显示屏的研磨与抛光。
YH2M-8195 is used for polishing/lapping single surface of metal parts, such as valve plate, wearing plate, rigid seal ring,
cylinder piston ring and oil pump blade, etc.as well as processing thin and hard brittle non-metal components of silicon, germanium, quartz, glass, ceramic, sapphire, gallium arsenide, ferrite, lithium niobate etc. such as phone, LCD panel, Tablet pc.
YH2M8195立式单面研磨抛光机主要特点 Technical characters：
1.YH2M-8195立式单面研磨(抛光)机为水冷式四工位单面研磨(抛光)机。四个工位上的工作环由四个独立的调速电机传动系统分别驱动旋转，四个加压气缸通过活塞杆伸缩驱动万向压板，分别对四个工位的工件可靠施压。
2.由精密减压阀和电气比例阀精确控制加工压力。
3.本机配有蠕动泵，根据加工工件的不同，精确控制研磨（抛光）液滴注流量，达到更好的研磨（抛光）效果。
4.采用PLC控制，控制方式灵活可靠。
5.用触摸屏做为人机界面显示报警和机床状态的实时信息;界面友好.信息量大。
1.There are four working stations; each working ring in the working station is driven by speed motor separay The work pieces of 4 stations will be reliably pressed by 4 pressurized cylinders.
2.Precise pressure reducing valve and electrical proportional valve accuray control the working pressure.
3.Equipped with Peristaltic pump, it is precise to control the flow rate of polishing/lapping liquid for a better effect to different work piece.
4.PLC controlling, which it is flexible and reliable.
5.Touch screen, it is convenient to show alert information and state. Besides, the interface is friendly and the information is huge
单面研磨抛光机价格
https://www.jc35.com/st2562/product_1483075.html
单面研磨抛光机价格